6000 Deep groove ball bearing
- 50 Pieces
- China
- 7 days
- 200000 Pieces per Week
Deep groove ball bearing is the most widely used bearing type and has many functions.The bearings are characterized by low friction and are optimized for low noise and vibration to achieve high rotational speeds.They can withstand radial and two-directional axial loads, are easy to install, and require less maintenance than other types of bearings.
Technical specification
DIMENSIONS
d | 12 mm | |
---|---|---|
D | 28 mm | |
B | 8 mm | |
d1 | ≈ 17 mm | |
D2 | ≈ 24.72 mm | |
r1,2 | min. 0.3 mm |
ABUTMENT DIMENSIONS
da | min. 14 mm | |
---|---|---|
Da | max. 26 mm | |
ra | max. 0.3 mm |
CALCULATION DATA
Basic dynamic load rating | C | 5.4 kN |
---|---|---|
Basic static load rating | C0 | 2.36 kN |
Fatigue load limit | Pu | 0.1 kN |
Reference speed | 60000 r/min | |
Limiting speed | 38000 r/min | |
Calculation factor | kr | 0.025 |
Calculation factor | f0 | 13 |
MASS
Mass bearing | 0.021 kg |
---|
Single row deep groove ball bearing is the most widely used bearing type.Offer closed (with seal or dust cover) or open design.Open bearings can also be installed sealing or dust cover, inner ring on the side of the general groove.
Dust cover
Use the type suffix Z
The main application of the inner rotation of the operating conditions
Install in the outer ring and form a narrow gap with the inner ring
Made of pressed steel
Standard configuration has an extension in the dustproof hole and no extension is expected in some sizes
Prevent dirt and debris without friction loss
Non-contact seal
The type suffix is RZ
Provides better sealing than dust cover
It can reach the same running speed as the dust cover
Form an extremely narrow gap with the inner ring shoulder
It is made of NBR (oil resistance and abrasion resistance) reinforced with strip steel framework
Low friction seal
Represented by the type suffix RSL or RST
Provides better sealing than non - contact seals
It is made of NBR (oil resistance and abrasion resistance) reinforced with strip steel framework
Contact seal
Use the type suffix RSH, RSH2, RS1 or RS2
Use a steel strip frame for reinforcement
NBR
FKM (type suffix: RS2 or RSH2, available upon request)
Different designs are available according to the bearings they use:
There are two RSH designs available for series 60, 62 and 63 bearings, depending on the size
The RS1 is designed to be sealed with grooves on the inner ring shoulder or side of the inner ring